Loctite Epoxy Five Minute Instant Mix 0.47-Fluid Ounce Syringe (1365868)

  • This high-strength 2 part epoxy is packaged in an advanced delivery system
  • High-strength formula bonds wood, metal, tile, ceramic, glass, plastic and more
  • Waterproof, sand able and paintable
  • Bonds metal, glass, ceramic, wood, many rigid plastics, china, tile, fiberglass, concrete and stone
  • Can be combined with fiberglass cloth for a durable patch
  • High impact resistance - won't crack when drilled
  • Convenient instant mix syringe consistently dispenses equal, uniformly mixed amounts of each component
  • 0.47-Fluid ounce plastic syringe

I can't speak to other applications but this was exactly what I was looking for. I needed a strong epoxy which would flow well into crevices but was thick enough not to run all over, this is about the consistency of cold maple syrup upon dispensing but hardens within a few minutes to tacky and then starts to solidify. I had a barrel shaped wiring harness with a number of wires close together, which would move and touch each other at extremes. I applied the epoxy to the wire ends, which were soldered in place, and then wrapped tape around the area to make a tube and then filled the area to make a solid epoxy plug. I did it once and let dry for a few hours and then did the process again. The result was exactly as desired, all the wires are encased in epoxy and the strain relief slides over the epoxy plug. The epoxy resin cures up very hard in 24 hours but it does not seem to be brittle. It fills gaps well and is not difficult to work with. If I was using this for any other application, I would ensure the work I wanted to connect was sanded and de-greased, to provide the epoxy something to grip onto. Perhaps this is the problem some folks are having who have rated this product low. I found it perfect for my needs.

These are great. The mix ratios are perfect. The length of the nozzles let me reach in to tight areas that need glue. There are two nozzles so you don't have to use the glue all at once. If you use both nozzles and have glue left, you can mix it like the two-tube syringe packages. I save the extra nozzles when I don't use them so I have plenty. This is 5 minute but if can be shorter depending on temperature and humidity.

I used this product to fill void underneath glued solid wood floor over concrete. I drilled four .161 holes at four locations of void and inserted mixer tip into one hole and filled with one syringe. I did this with all four holes (4holes 4 syringes). Epoxy setup quickly and no hollow sound coming from void. This stopped the popping sound from void. Quick and easy.

Very strong I use this when I need Max strength and regular wood glue just won't do and a much better value than a epoxy system when you don't use a lot

As a craftsman I know what I need and have found this to be a good supplier of epoxy at a reasonable price with a quick delivery time.

Quality epoxy. Great strength. No mess mixing. Use right from the syringe. But 5 minutes is fast. Better know where you want this stuff to go and how you plan to clamp you pieces once the epoxy is spread on. And you better not wait too long to use the whole syringe. Even recapped the epoxy will quickly become solid in the mixer.

So handy. For jewelry, ceramics, glass, whatever. Perfect.

Used it on a 3d printed piece and it worked like a charm. Glad I bought two

Ignore the negative reviews since it's obvious they don't know what they're doing. You must actually read and follow the instructions. I've used this epoxy a dozen times and never had an issue. Self Mixing of resin and hardener in the disposable syringe. Syringe allows pinpoint application and into small holes. 2 applications per container (you get 2 Syringes). No mess (pull back on the plunger slightly after application). Extremely strong and cures in 5 minutes with usable strength in 30-60 minutes. Permanently bonds metal, glass, ceramic, wood, fiberglass, many rigid plastics, china, tile, fiberglass, concrete and stone.

  • This high-strength 2 part epoxy is packaged in an advanced delivery system
  • High-strength formula bonds wood, metal, tile, ceramic, glass, plastic and more
  • Waterproof, sand able and paintable
  • Bonds metal, glass, ceramic, wood, many rigid plastics, china, tile, fiberglass, concrete and stone
  • Can be combined with fiberglass cloth for a durable patch
  • High impact resistance - won't crack when drilled
  • Convenient instant mix syringe consistently dispenses equal, uniformly mixed amounts of each component
  • 0.47-Fluid ounce plastic syringe

I can't speak to other applications but this was exactly what I was looking for. I needed a strong epoxy which would flow well into crevices but was thick enough not to run all over, this is about the consistency of cold maple syrup upon dispensing but hardens within a few minutes to tacky and then starts to solidify. I had a barrel shaped wiring harness with a number of wires close together, which would move and touch each other at extremes. I applied the epoxy to the wire ends, which were soldered in place, and then wrapped tape around the area to make a tube and then filled the area to make a solid epoxy plug. I did it once and let dry for a few hours and then did the process again. The result was exactly as desired, all the wires are encased in epoxy and the strain relief slides over the epoxy plug. The epoxy resin cures up very hard in 24 hours but it does not seem to be brittle. It fills gaps well and is not difficult to work with. If I was using this for any other application, I would ensure the work I wanted to connect was sanded and de-greased, to provide the epoxy something to grip onto. Perhaps this is the problem some folks are having who have rated this product low. I found it perfect for my needs.

These are great. The mix ratios are perfect. The length of the nozzles let me reach in to tight areas that need glue. There are two nozzles so you don't have to use the glue all at once. If you use both nozzles and have glue left, you can mix it like the two-tube syringe packages. I save the extra nozzles when I don't use them so I have plenty. This is 5 minute but if can be shorter depending on temperature and humidity.

I used this product to fill void underneath glued solid wood floor over concrete. I drilled four .161 holes at four locations of void and inserted mixer tip into one hole and filled with one syringe. I did this with all four holes (4holes 4 syringes). Epoxy setup quickly and no hollow sound coming from void. This stopped the popping sound from void. Quick and easy.

Very strong I use this when I need Max strength and regular wood glue just won't do and a much better value than a epoxy system when you don't use a lot

As a craftsman I know what I need and have found this to be a good supplier of epoxy at a reasonable price with a quick delivery time.

Quality epoxy. Great strength. No mess mixing. Use right from the syringe. But 5 minutes is fast. Better know where you want this stuff to go and how you plan to clamp you pieces once the epoxy is spread on. And you better not wait too long to use the whole syringe. Even recapped the epoxy will quickly become solid in the mixer.

So handy. For jewelry, ceramics, glass, whatever. Perfect.

Used it on a 3d printed piece and it worked like a charm. Glad I bought two

Ignore the negative reviews since it's obvious they don't know what they're doing. You must actually read and follow the instructions. I've used this epoxy a dozen times and never had an issue. Self Mixing of resin and hardener in the disposable syringe. Syringe allows pinpoint application and into small holes. 2 applications per container (you get 2 Syringes). No mess (pull back on the plunger slightly after application). Extremely strong and cures in 5 minutes with usable strength in 30-60 minutes. Permanently bonds metal, glass, ceramic, wood, fiberglass, many rigid plastics, china, tile, fiberglass, concrete and stone.

I've used the larger bottles of this product, which requires one to mix two dimensions of this product. When these arrived as a first time purchase, was impressed with how conveniently using this "Instant Mix" unit on a smaller project. Application of the Epoxy was easier to apply in some tight spots and cleaner overall. Was pleased to have discovered this offering and would recommend it highly.

dow: none;"> I've used the larger bottles of this product, which requires one to mix two dimensions of this product. When these arrived as a first time purchase, was impressed with how conveniently using this "Instant Mix" unit on a smaller project. Application of the Epoxy was easier to apply in some tight spots and cleaner overall. Was pleased to have discovered this offering and would recommend it highly.

Comments

Popular posts from this blog

Eww, gaming laptop

Daily Scorpio Horoscope April 23 (23/04)

Daily Scorpio Horoscope September 26 (26/09)